A-100 VCO's and noise generators

Module	Description	Controls	Inputs/Outputs
	Standard VCO 4 waveforms; Rectangle with adjustable pulsewidth (0-100%, including Pulse Width Modulation), Sawtooth, Triangle and Sine. Hard sync input, frequency range about 1Hz-5kHz. CV by 1V/Oct. Difference to High-End VCO: Frequency range, waveforms not 100% ideal (musically not a disadvantage), no linear FM input, no softsync input.	Range (5-step rotary switch) Tune CV 2 PW PW CV 2	CV 1 CV 2 PW CV1 PW CV2 SYNC Rectangle Saw Triangle Sine
	High-End VCO Like the A110, but improved frequency range and waveforms, a linear FM input and a soft sync input.	Range (7-step rotary switch) Tune Fine CV 2 PW PW CV Linear FM	CV 1 CV 2 PCV Hard sync Soft sync Linear FM Rectangle Saw Triangle Sine
	Noise/Random Noise generator with white and colored noise outputs. Red and blue level of colored noise adjustable. Random voltage output with rate (i.e. variation speed) and level adjustable	Red level Blue level Random rate Random level	White noise Colored noise Random output
	Dig. noise/Random clock Digital clock generator with adjustable frequency (spectrum); high frequency=noise, low frequency=random pulses. Typical applications: second noise generator, FX sounds, random clock pulses. 808 Sound source A Roland TR-808 sound generator with 6 fixed square pulse oscillators for the classic cowbell, cymbal and hihat sounds. 2 outputs with 2 and 6 oscillators respectively.	Rate/Spectrum	Noise/Clock out Ext. clock in Mix 2 Mix 6

SNW HOME